Accueil > Liste de Produits > Pont roulant > Pont de poutre simple > Pont roulant simple de la poutre 3T pour la construction de bâtiments en acier

Pont roulant simple de la poutre 3T pour la construction de bâtiments en acier

  • $800
    1-0
    Set/Sets
  • $4700
    ≥1
    Set/Sets
Type de paiement:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT
Quantité de commande minimum:
1 Set/Sets
transport:
Ocean,Land,Air
Hafen:
Qingdao Port,Tianjin Port,Shanghai Port
Share:
  • Description du produit
Overview
Attributs du produit

ModèleLDC, LD, LDP, HD

marqueDGCrane

Capacité d'approvisionnement et informa...

Détails d'emballageLe palan électrique est emballé dans une caisse en contreplaqué, d'autres sont emballés dans des tissus non tissés

productivité1500sets/month

transportOcean,Land,Air

Lieu d'origineChine

Soutenir18000 sets/year

Certificats ISO

Code SH84261120

HafenQingdao Port,Tianjin Port,Shanghai Port

Type de paiementL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT

Emballage & livraison
Unités de vente:
Set/Sets
Type de colis:
Le palan électrique est emballé dans une caisse en contreplaqué, d'autres sont emballés dans des tissus non tissés

Brève introduction pour le pont roulant monopoutre 3t pour la construction de bâtiments en acier

Un pont roulant à poutre unique est un pont roulant qui a une poutre de pont qui supporte le chariot et le palan. Le chariot et le palan montent sur la bride inférieure de la poutre du pont. La grue à filetage unique à poutre unique est considérée comme fonctionnant par le haut lorsque la poutre du pont monte au-dessus des poutres de piste.

Application: Cette grue est généralement utilisée à l'intérieur, comme un atelier, une usine, une aire de stockage, etc. pour soulever des marchandises. Il est interdit d'utiliser l'équipement dans un environnement combustible, explosif ou corrosif.

1ton overhead crane
  • Solutions pour différentes conditions d'atelier

1ton overhead crane

Grue de pont monopoutre à faible hauteur libre

Il y a un entrepôt avec une hauteur limitée du support au sol, mais qui a besoin d'une hauteur de levage plus élevée, alors nous concevrons la grue avec une poutre carrée et un palan à hauteur réduite, qui aura une hauteur de levage plus élevée.

1ton overhead crane

Grue de pont monopoutre à suspension

Pour certains entrepôts , il y a des poutres en béton au plafond, mais pas de colonnes. Selon les besoins pratiques, il faut un pont roulant, nous suggérons donc une grue à suspension qui s'accroche à la poutre en béton si le toit peut supporter suffisamment de poids.

1ton overhead crane

Pont roulant monopoutre de type européen

Pour l'atelier de produits de haute technologie, ou si vous avez des exigences de faible bruit, la grue de type européen est recommandée.

overhead crane design

Grue de pont monopoutre à suspension latérale

Dans certains entrepôts , la hauteur de la colonne est limitée, mais il y a beaucoup d'espace du haut de la colonne au plafond. Selon cette condition, nous donnerons une grue à suspension latérale avec palan à suspension latérale, ce qui augmentera la hauteur de levage.

  • Description détaillée des composants

overhead crane design

overhead crane design

Monorail Single Girder Bridge Crane

  • Flux de production

overhead crane design

Incoming  material 

test

Every batch of raw materials must be tested when they enter the factory. We set up a special testing room.It covers non-destructive inspection room, metallographic analysis and hardness inspection room, mechanics inspection and chemical inspection room. Testing methods has non-destructive testing,metallographic analysis, mechanical testing and chemical analysis, mainly testing and control of the raw materials, crane components, product

Uncoiling 

and flattening the steel plate  

After uncoiling, leveling, sizing and shearing, the required length and width of the flat sheet can  be obtained, which can protect the flat sheet without scars, high shearing accuracy, double palletizing and discharging, high efficiency and speed.
Pressure    Groove  According to crane specifications to groove pressing with different model, and main girder forming at one time can realize that the U-groove of the whole main girder of single girder crane has no butt weld, thus reducing stress concentration point, improving the strength and stiffness of the main girder, and greatly improving the comprehensive bearing capacity of the main girder.
Welding  Stiffener There is a support which can keep the main girder be not deformed, and workers can work easily without bending.
Welding main beam with the ending     
Welding I  beam and  ventral            Submerged arc welding (SAW) is a kind of protective welding with Rohm double gun automatic welding, which has the advantages of full weld, deep molten pool, beautiful shape and high welding quality. At the same time, the welding distortion is reduced.
Checking  span,welding  flange In production, the hanging plates of the main girder and the end girder are processed together, punched together, and then knock down from end beam and weld to the main girder.
Painting Two-layer primer, two-layer paint

  • Emballage et livraison

Steel parts Steel parts are packed in polythene woven cloth, which can prevent rainwater from directly contacting the crane and protect the painting
Electric parts and hoist Electric parts are packed by strong plywood crate case, which plays a protective and moistureproof role.

  • Cas d'installation

overhead crane design
overhead crane design
overhead crane design

  • Informations nécessaires pour obtenir un prix

Basic informations needed of single girder overhead crane 1. Capacity:_  ( max weight of material)
2. Span:_ ( rail center to rail center)
3. Lifting height:_ ( from ground to hook)
4. Crane traveling length:_m
5. What goods will the crane lift?
6. Working environment:
7. Speed requirement:
8. Comtrol method: control pendent, remote control, cabin control ( normally choose controll pendent and remote control)  

Groupes de Produits : Pont roulant > Pont de poutre simple

Télécharger
Accueil > Liste de Produits > Pont roulant > Pont de poutre simple > Pont roulant simple de la poutre 3T pour la construction de bâtiments en acier
Envoyer à ce fournisseur
  • *Sujet:
  • *À:
    Mr. Michael
  • *E-mail :
  • *message:
    Votre message doit comporter de 20 à 8000 caractères
Envoyer Une Demande
*
*

Accueil

Product

Phone

À propos de nous

Demande

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

envoyer